Targus USB 2.0 DVD/CD-ROM Slim External Drive - Manual (Page 4)

Targus USB 2.0 DVD/CD-ROM Slim External Drive
NOTE: Not all USB hubs and port replicators will support the use of this drive with the
Y-cable. If your hub or port replicator does not allow the drive to function, the drive will
need to be attached directly to the USB ports on your computer.
When the USB type A connectors are used together, the Y-cable
provides enough power to run the Targus drive, eliminating the need for
an AC power adapter.
1 Using the supplied Y-cable, connect the USB type A connector with
the USB pass-through into a USB port on your computer.
Y-cable with USB type A and B connector ends
Type B Type A
USB pass-
through
2 Connect the single USB type A connector into another USB port on
your computer for additional power to the drive.
3 Connect the cable’s USB type B connector (the single end) into the
Targus drive.
Your computer’s operating system automatically detects the new
hardware and begins installing the appropriate default drivers.
4 Follow the on-screen instructions to complete the driver installation.
You can now begin using the drive.
3