Tatung TLM1905 User Manual
Page 22
16
Hot-Key Buttons for Quick Adjustment of Monitor
Settings.
(〝AUTO-ADJUST〞hot-key is effective only when analog
input signal is selected for application)
1. "Auto-adjust" hot-key button:
Press button 2 to apply the monitor setting
automatically. A small “AUTO-ADJUST”
OSD is also displayed.
2. "Adjust-volume" hot-key button:
Press button 3 to allow you to adjust the
audio volume directly. A small “AUDIO-
VOLUME” OSD is also displayed.
3.Video "Source" hot-key button:
Press button 4 to allow you to switch DVI,
analog, video and S-Video signal input
directly and the selected "input signal" is also
displayed on the top left corner. If there is no
video signal received, the "input signal"
display will be disappeared and then the
following message will be displayed.
* To close the small OSD windows, press the power button (button 5).