TERK Technologies XMDGM100 - Manual (Page 7)

6
Installation
STEP 7
LOCATE AND MOUNT THE ADAPTER BOX (A3) IN SUITABLE LOCATION
THAT WILL NOT INTERFERE WITH THE RADIO AND WILL NOT VIBRATE OR
RATTLE AFTER INSTALLATION. WE LOCATED THE UNIT IN A SPACE NEAR
THE AIR DUCT AND SECURED IT IN PLACE USING VELCRO
.
STEP 8
AFTER THE ADAPTER BOX (A3) IS SECURE – CONNECT THE LARGE AND
SMALL CONNECTORS FROM THE HARNESS (W1) TO THE BACK OF THE
RADIO, AND CONNECT THE ANTENNA CABLE TO THE ANTENNA JACK ON
THE BACK OF THE RADIO.
Smart Digit
al Adapt
ert