Dv-d6500 technical documentation, Front panel, back panel & ir remote, Architect's specifications – Tascam DV-D6500 User Manual

Page 2

Advertising
background image

DV-D6500 Technical Documentation

7733 Telegraph Road • Montebello, CA 90640 • (323) 726-0303 • http://www.tascamcontractor.com
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.

Page 2 of 2

FRONT PANEL, BACK PANEL & IR REMOTE

DV-D6500_TECHDOC.pdf

120602

ARCHITECT'S SPECIFICATIONS

The DVD player shall be a single disc player
with a powered loading tray that can mount
in 2 rack spaces of a standard 19" rack
mount. Dimensions shall be 19" x 4-1/8" x
10-9/16" (W x H x D).

Metric measurements: 482x104x304mm.

The DVD player shall be able to read content
from standard DVD and CD media, as well
as CD-R, CD-RW and DVD-R media. The
DVD player shall be able to play DVD Video,
Super Video CD, Video CD, and Audio CD
disc formats.

The DVD player shall offer video outputs on
composite, S-Video and component formats.
The player shall be able to produce true line
progressive scan as well as interlaced
imaging; the type of output shall be
selectable on the rear panel, or on the
infrared remote.

The DVD player shall offer image
enhancements, including processing for
gamma, brightness, contrast, saturation,
tint, sharpness and Y delay. These shall be
able to be stored in user presets.

The DVD player shall offer analog audio
output in stereo on RCA connectors. The
D/A converters shall be 24 bit, 96kHz. The
analog output shall offer dynamic range
>106dB (20 or 24 bit signal), and have a
total harmonic distortion of <0.002%.
Additional processing shall be available for
enhanced sound on analog outputs. Mode
shall include Action, Drama and Theater.

The DVD player shall offer digital outputs
through optical and coaxial digital outputs.
Digital outputs shall be able to pass Dolby
Digital and DTS surround streams for later
decoding.

The DVD player shall be remote controllable
via a TASCAM RC-6500J infrared remote, or
by RS-232 serial controls as described in the
TASCAM DV-D6500 RS-232 specification.
The RS-232 port shall be provided in a male
DB9 connector.

The DVD player shall be a TASCAM
DV-D6500.

NOTE: This text is available in a standard text file
on TASCAM's Sound Contractor CD-ROM.

Advertising