Taylor AB-1001-BL - Manual (Page 8)

8
HOW TO USE YOUR CHOPPER
(Set at high speed – button 2)
NOTE: All attachments used on the Chopping Bowl must be firmly attached to
the spindle. Always adjust the attachments until you are sure that they are cor-
rectly fitted.
CHOPPING BLADE
Best for chopping, grinding and mixing; meat, vegetables, dried fruit, nuts or making
bread crumbs. THIS BLADE IS VERY SHARP; HANDLE WITH CARE TO
AVOID INJURY, ESPECIALLY WHEN CLEANING. DO NOT TOUCH
BLADE DIRECTLY.
1.
Wash and dry all components thoroughly as stated above.
2. Make sure the appliance is switched off and unplugged.
3. Place the chopping blade over the spindle until it snaps into place. The top of the
chopping blade has a rim. Be sure to slide with the rim side up onto the spindle.
4. Place the chopper bowl on a flat, sturdy surface.
5. Place the assembled blade and spindle into the center of the chopping bowl, sit-
ting it properly in place. Make sure the double bladed knife is running smoothly
by turning the hub. Do not touch the blades.
6. Clean and wash the food to be used.
7. Add food ingredients to the chopping bowl, distributing them evenly with a
spatula (not included). When chopping larger foods, pre-cut them into pieces of
an even size, approximately ½ inch to ¾ inch pieces.
8. Place the chopper cover onto the chopper bowl and turn counter-clockwise
making sure tabs and latches are interlocked. NEVER OPERATE THE
CHOPPER UNLESS THE BLADES AND COVER ARE COR-
RECTLY LOCKED IN.
9. Attach the chopper adaptor to the main unit by twisting it on.
10. Place the adaptor onto the chopper lid.
11. Plug the appliance into the appropriate power outlet.
12. Turn the unit on and hold the bowl firmly during the chopping process. You can
easily add liquid to the bowl during the chopping process by using the vent holes
on the top of the chopper lid.
13. If additional ingredients need to be added during the chopping process, or when
you have completed your chopping, release the speed selector button then un-
plug the unit.
14. Remove the main unit and the adaptor from the chopper lid. Detach the adap-
tor from the main unit by turning clockwise.
15. Remove the lid from the bowl by turning it clockwise. Then remove the blade
from the spindle.
16. If you want to use the chopper bowl to store your food, the shaker lid seals
tightly and twists to allow adding herbs or cheese to your favorite dishes.
17. When finished, remember to wash and dry all parts as described above.