Tally Genicom 9316 - Manual (Page 32)

Printing on Media 26
Use envelopes that are
Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps
Approved for laser printing
Dry
1
In the printer driver (Setup tab/Media Type option), select Envelope.
2
Select the size of the envelope (Paper tab/Original Document Size
option).
3
Place the envelopes on a flat surface, and flatten them by pressing down
the corners.
4
Flex the envelope stack (including the edges) to remove any stiffness.
5
Correct any bent corners, and tap the envelopes on a flat surface to align
them.
6
Squeeze the right paper guide
and open the paper guides.
7
Load the envelopes lengthwise and the printing-side up as shown in the
illustrations.