Tannoy REVEAL TS12 - Manual (Page 3)

& &
PERFORMANCE TS8 TS10
Output power 200W RMS 300W RMS
Low frequency response 32Hz(-6dB) 29Hz(-6dB)
Limit for usable output 18Hz 16Hz
Inputs 2 x line level phone 2 x line level phone
2 x XLR balanced 2 x XLR balanced
Outputs 2 x XLR balanced 2 x XLR balanced
(direct or 80Hz high pass) (direct or 80Hz high pass)
Input filter 2nd order low pass, 2nd order low pass,
50Hz - 150Hz, -6dB 50Hz - 150Hz, -6dB
Auto mute After approximately 12 mins. After approximately 12 mins.
in absence of input signal in absence of input signal
Driver type 200mm (8”) 250mm (10”)
Enclosure type Closed box Closed box
Enclosure volume 12.5 litre / 0.45cu.ft 16.75 litre / 0.6cu.ft
Additional features Phase control Phase control
Crossover defeat switch for Crossover defeat switch for
LFE operation LFE operation
Soft limiting to avoid overload Soft limiting to avoid overload
LF extension control LF extension control
Enclosure (HxWxD)
- including feet
292 x 280 x 255mm 323 x 286 x 286mm
11 1 / 2 x 11 1 / 2 x 10” 12 1 / 16 x 11 5 / 16 x 11 5 / 16 ”
Enclosure weight 7.0kg / 15.4 lbs 9.5kg / 21 lbs
Mains voltage 120V nominal AC~60Hz 120V nominal AC~60Hz
230V nominal AC~50Hz 230V nominal AC~50Hz
Mains fuse 120V - T2AL / 250V 120V - T3. 15AL / 250V
230V - T1AL / 250V 230V - T1.6AL / 250V
Maximum power
consumption
275VA 416VA
TS8, TS10 & TS12 Professional Active Subwoofers
Three powerful active subwoofers have been designed to complement the Reveal range of studio
monitors for 2.1, 5.1, 7.2 configurations or in any other multi channel combination required. All are
substantially constructed closed box cabinets with high power handling and long throw drive units
delivering tightly controlled bass with massive impact; ensuring that the punch and drive of the mix track
is faithfully reproduced.
& &