True Fitness 600R - Manual (Page 92)

Removal & Replacement 600R
Remove Belt & Tensioner Assembly
Step 1.
Use 6 mm hex wrench to remove
brake bracket locking screw.
Step 2.
Use 13 mm open-end wrench to
loosen the 4 bolts holding the
brake bracket to the frame.
Copyright 2001 True Fitness Technology, Inc.
Page 90
Tools Required:
6 mm-Hex Wrench
13 mm Open-End Wrench
Hammer Handle
Step 1. Remove Locking Screw
Step 2. Loosen Bracket Bolts
Note:
Frame is slotted to allow
brake bracket to slide when
bolts are loose.