Setting up mytalker, Charging mytalker – Tekkeon ET7000 User Manual
Page 6
Setting Up myTalker
Before using myTalker, you must:
• Charge myTalker
• Pair myTalker to your mobile phone
• Connect myTalker to your iPod or MP3 player
Directions for each of these activities are provided in the following three sections.
Once these steps are completed, you will be ready to use myTalker!
Charging myTalker
You must charge myTalker for approximately two hours. When fully charged, the
battery provides up to five hours of talk time and up to 120 hours of standby time.
To Charge myTalker
1. Connect the small end of the USB cable into the USB port on myTalker.
2. Connect the opposite end of the USB cable into the
USB port on your computer or into an optional USB
power adapter, which in turns plugs into a wall outlet.
While myTalker is charging, the amber LED will
remain on until fully charged.
3. When the amber light turns off, unplug the USB cable.
4
et7000_ug_fnl_R 1/24/06 2:48 PM Page 4