Thermador Char-Glo CGB36RU - Manual (Page 25)

Page 23
CLEANING CHART
As a safety measure, do not store cleaners
in the storage drawers in the barbecue.
PART and MATERIAL SUGGESTED CARE
Exterior Finish - Stainless Steel Finish Protector: Stainless Steel Magic ® and EZ Brite ®
Stainless Steel The quality of this material resists most stains and pitting, providing
the surface is kept clean and protected. Apply to a clean surface.
Nonabrasive Cleaners: detergent and water, Fantastik
® , 409 ® , vinegar.
Mild abrasive Cleaners: liquid Kleen King ® ,
Drip Tray – Tip: Keep a thin layer of sand or bird gravel on top of foil liner to absorb
grease.
Cool barbecue. Remove tray and set on a flat surface. Remove foil
liner. Wipe up excess grease with paper towels. Wash with detergent
and hot water or multipurpose cleaner, i.e. 409
® or Fantastik ® . Rinse
and dry; reline with heavy-duty foil. Replace tray. Clean often to avoid
possibility of a grease fire.
Knobs, Skewer Handle Wash with detergent and warm water; rinse and dry.
Plastic
Reflectors, Discoloration of stainless steel on these parts is to be expected,
Burner Box – due to the intense heat from the burners.
Stainless Steel
Grates/Grill – Refer to the Quick Clean Method.
Porcelain on steel Grates may also be scrubbed with an SOS ® pad and hot water when
cool.
Double-U™ shape Cool barbecue. Remove grates, radiant baffles and remove hex nuts at
the rear ends of grill burner. Lift grill burner from the rear and remove
wire igniter. Clean the exterior of the grill burner with a wire brush.
Use a straightened paper clip to clear clogged ports. Shake out any
debris through the air shutter. (Do not use a wooden toothpick to clear
any debris in the clogged ports.)
Grill Burner
Stainless Steel
Stainless Steel