Installing the drivers – TOA Electronics 595U User Manual
Page 14
4
Installing the Software and Drivers on a Windows Computer
4.
Read the License Agreement and select “I accept the terms in the license
agreement” to agree to the terms. Click Next. (A series of dialog boxes
guides you through the installation.)
5.
Use the Next and Back buttons to navigate through the wizard.
6.
In the Installation Complete! window, click Finish.
Installing the Drivers
To install the drivers:
1.
If your USB modem has not yet been activated, ensure you are in the
network coverage area (not roaming).
2.
Run Sprint Connection Manager. (Double-click the program’s icon
[
] on your desktop.)
3.
Wait for Sprint Connection Manager to start up and display
“No device...”.
4.
Slide the front panel off the USB modem.
5.
Hold the battery so that the side with two white arrows faces up and
the gold contact points on the end of the battery line up with the gold
contact points on the USB modem. Insert the battery into the USB
modem.
6.
Slide the front panel onto the USB modem until the panel clicks into
place.
7.
Slide the lever on the bottom of the USB modem in the direction
indicated by the triangle to release the USB modem’s USB connector.
Warning:
To avoid the risk of explosion, use the same battery model when replacing
the battery. Properly dispose of the used battery.