Tripp Lite HDMI ACTIVE EXTENDER B122-000 - Manual

Warranty
Registration:
register online today for a
chance to win a FREE T
ripp Lite
product—www
.tripplite.com/warranty
HDMI Active Extender
Model:
B122-000
Package Contents:
• B122-000 HDMI Active Extender
• External Power Supply
(Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 0.5A)
• Owner’s Manual
Owner’s Manual
Installation
Note: Test to make sure the entire installation works properly before pulling cables through ceilings/walls.
1 Connect the longer HDMI cable between the source and the connector on the B122-000 labeled “Source.”
Note: For extension distances Over 75 ft., use 24Awg HDMI cable such as the Tripp Lite P568-100-HD.
2 Connect the external power supply to the B122-000, and then plug it into a Tripp Lite Surge Suppressor, Uninterruptible Power Supply (UPS),
or Power Distribution Unit (PDU). The Green LED will illuminate to indicate that the unit is receiving power.
Note: External power is not required in all installations. Power can be pulled through the HDMI cable from the video source and display. However, if the source
and display do not provide this power, the included power supply must be used.
3 Connect the shorter HDMI cable between the monitor and the connector on the B122-000 labeled “Display.”
Note: The HDMI cable connecting the monitor to the B122-000 must be no longer than 16 ft. (5 m.).
Product Features:
• Extend either a 1080p (24Hz) or 1080i (60Hz) signal up to 150 ft. from
the source.
• HDCP-compliant
• External power not required in most installations
BLU-RAY PLAYER
1080p (24Hz)
MONITOR
B122-000
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
201203197 93-3143.indd 1 3/26/2012 4:01:30 PM