TP-Link TL-SG1008D - Manual (Page 9)

5
Chapter 3 Installation
The Switch can be either located on a desktop or mounted on a wall.
3.1 Mounting the Switch on a Desk
To locate the Switch on a desktop, please follow these steps:
1) Place the Switch on a flat desk.
2) Inspect the Power Adapter carefully and make sure that it
is properly connected to a power source.
3) Ensure adequate ventilation space around the switch for
dissipating heat and air.
Note:
Please avoid any heavy thing placed on the switch.
To ensure the stable cable connection, please keep the switch
horizontal on the desktop, with white cover facing up.
3.2 Mounting the Switch on a Wall
There are two wall-mounting slots on the bottom panel of the
Switch. To mount the Switch on a wall, please follow the steps
below.
1) Drill two holes into the wall. Insert a screw into each hole
and leave a part of its head exposed.
2) Place the two wall-mounting slots over the screws and
slide the Switch down to fasten it.