Wipe away any spilled oil, Figure 42. oil fill plug, Figure 43. disconnecting/connecting spark plug – Tecumseh LV156EA User Manual

Page 19: Grounding post connection, Spark plug connection, Figure 45. typical spark plug connection

Advertising
background image

181-1215-14

Four-Cycle Engine • Vertical Crankshaft • Air-Cooled

Page 17

8.

Add oil to overflow point, making sure to avoid spilling
and fill with recommended oil. See Table 1 and "III. Oil
and Fuel Specifications" instructions on page 4. See
Figure 42. Afterward, continue reading instructions
below.

NOTES

DO NOT overfill oil filler. Doing so may result in oil
carry-over to the air cleaner and equipment and cause
malfunction or damage.

Contact your Authorized TecumsehPower Servicing Dealer
for TecumsehPower Oil.

9.

Wipe away any spilled oil.

10. Screw oil fill cap/plug back into oil fill hole. Tighten

securely. See Figure 42.

11. Carefully disconnect spark plug wire from grounding

post, if provided. See Figures 43 thru 45.

12. Connect spark plug wire to spark plug before attempt-

ing to start engine.

NOTES

The oil filter if so equipped, should be changed every 100
operating hours or at least once a year.

The filter should be changed more often if the engine is
operated in extremely dusty or dirty conditions.

Contact your Authorized TecumsehPower Servicing Dealer
for a genuine replacement Oil Filter.

Figure 42. Oil Fill Plug

Figure 43. Disconnecting/Connecting Spark Plug

Figure 44. Typical Grounding Post/Spark Plug Connection

Figure 45. Typical Spark Plug Connection

1. Grounding Post Connection

2. Spark Plug Connection

1

2

Advertising
This manual is related to the following products: