TELEFUNKEN TTL-700 - Manual (Page 16)

Times of pushing
button
PROCEDURE SELECTION
If you push the PROCEDURE SELECTION button for 6 times, it will resume the original mode, and it will circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic programs. Soak with slight
stirring before wash.
0
1
2
3
4
5
Applicable procedure
Contents(the lighted indicators
indicate the programs about to run)
Spin(spin after drain)
Wash(the washing
liquid remains in the
tub)
When the common laundries
need washing, rinsing and
spinning.
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
When the laundries need only
spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
When the power is switched on, the washing machine will check the cloth automatically. After that,
the water level is set automatically. To select other water level, push the WATER LEVEL SELECTION
button in page 11 .
Page 11
Wash, rinse, spin
Rinse, spin
Wash, rinse(the
rinsing liquid remains
in the tub)
Repeat using the washing
liquid
Even there's no water in the tub, the spinning will start
after a certain period.
Do not use the SOAK program for the woolen laundries.
Wash the laundries that are prone to lose colors
separately from other laundries.
The pulsator will not rotate unless the water is filled to
selected water level.
Selection method of the procedure programs
Attention
Using process Using process
Selected procedure
program
4 Push the WATER LEVEL button to select
suitable water level
WATER LEVEL SELECTION
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak, wash, rinse, spin
1 14