TDK Belleta iEA Series - Manual

Data Sheet: Belleta ® iEA Series –Single Output Eighth Brick
©2004 TDK Innoveta® Inc.
iEAFullDatasheet 032707 3/29/2007 Revision 2.0 ℡ (877) 498-0099
1/41
Belleta® iEA Series DC/DC Power Modules
48V Input, 25A Output
Eighth Brick
The Belleta Series offers an industry standard
eighth brick power module with true useable
power. Thanks to its low component count and
single-board open-frame design, it provides both
better electrical and thermal performance, and
lower cost than many other suppliers’ eighth brick
product offerings. Belleta® modules are perfect
for both next generation planning and cost
reduction design environments
Standard Features:
• Size – 58.4mm x 22.9 mm x 8.8
mm (2.3 in. x 0.9 in. x 0.347 in.)
• Thru-hole pins 3.68 mm (0.145”)
• High efficiency – greater than 89%
• 1500Vdc isolation voltage
• Meets basic insulation spacing
requirements
• Constant switching frequency
• Industry Standard Footprint
• Output Voltage Adjustment
• Remote on/off (positive logic)
• Remote sense
• Auto-recovering output over-
voltage protection
• Auto-recovering output over-
current protection
• Auto-recovering output short circuit
protection
• Auto-recovering over-temperature
protection
• UL 60950 (US and Canada), VDE
0805, CB scheme (IEC950), CE
Mark (EN60950)
• ISO Certified manufacturing
facilities
• Patented Design
Optional Features:
• Remote on/off (negative logic)
• Latching output over-voltage
protection
• Short Thru-hole pins 2.79 mm
(0.110”)
• Long Thru-hole pins 5.08 mm
(0.200”)