TP-Link TD-8811B - Manual (Page 24)

TD-8811/8811B External ADSL2+ ROUTER
19
3.5 USB Configuration
If you use the USB interface, First, you must install the USB’s drive to the computer. You can
obtain the drives from the provided CD or download from our website. ( http://www.tp-link.com )
USB Drive installation procedures
If the hardware is installed before the computer is Power On. Please turn on the computer and
enter the operating system, Then the operating system will identify the device. If the hardware is
installed after the computer is Power On, the desktop will display the information about finding the
new hardware.
Then you will see the Figure 3-25 require install software for USB Device, select ‘Install from a list
or specific location (Advanced)’and Clicking the next button to enter the next step, then Figure
3-26 will display.
Figure 3-25