Tonka Wheel Pals Triple Track Tower 6502290001 - Manual (Page 2)

ASSEMBLY PLAY FEATURES
Assembling the WHEEL PALS TRIPLE TRACK TOWER is easy! Just follow these steps:
To enable play, be sure
ON/OFF switch (located
on side of playset) is in
“ON” position.
NOTE: Switch to “OFF”
to shut down and
conserve battery life.
1.
Connect
the starting
gate (two
checkered
flags) to the
top of the
racetrack
tower as
shown.
2.
Connect the top of the
curved track to the highest
tower (tower #3), the top of
the wavy track to the middle
tower (tower #2), and the
top of the straight track
to the bottom tower
(tower #1) as shown.
3.
Connect the bottom of each
track to the finish line as shown.
Here are a few suggestions for your new
WHEEL PALS TRIPLE TRACK TOWER toy:
c.
Press the button to start the race and
for great racing sound effects!
a.
Place the
racer(s) on
top of the
tower track
platform(s).
b.
Make sure the checkered
flag at the finish line is set
in the down position as
shown.
d.
You can also lift the individual tabs
on each track tower platform to
start the racers manually (without
sound effects)!
e.
Once you are finished racing,
you can store each car on the
back of the tower in the storage
compartments as shown.