Toshiba WL67 - Manual (Page 23)

English
23
1/2 SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
AV connection OK
Picture position OK
MENU Back EXIT Watch TV
1/2 SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
AV connection OK
Picture position OK
MENU Back EXIT Watch TV
HDMI audio
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the ‘Connecting a
computer’ section), then use the HDMI1 audio settings.
In the SET UP menu press down until
AV connection is highlighted, then press OK.
2
3
In the AV connection menu press down to
highlight PC/HDMI1 audio and using right
select HDMI1.
Then highlight HDMI1 audio and using left or
right select Auto., Digital or Analogue.
1
Input selection and
AV connections
continued
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
HDMI1 audio
AV connection
PC/HDMI1 audio PC
HDMI1 audio Digital
EXT2 input S-VIDEO
Monitor (Audio) Fixed
MENU Back EXIT Watch TV
AV connection
PC/HDMI1 audio HDMI1
HDMI1 audio Digital
EXT2 input S-VIDEO
Monitor (Audio) Fixed
MENU Back EXIT Watch TV
Highlight PC/HDMI1 audio then use right to
select the PC option. 2
NOTE: Selecting the PC option will force HDMI
into digital audio.
In the SET UP menu press down until
AV connection is highlighted, then press OK. 1
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
‘Connecting a computer’ section), then use the
PC/HDMI1 audio settings.
PC audio
If the sound is missing select an alternative
setting.
NOTE: HDMI1 supports digital and analogue
sound, HDMI2 is digital sound only.
g