TOA Electronics TDX2 - Manual (Page 11)

11
5. Rear Panel Functions
1. Power Switch.
2. Mains Fuse - Located in a finger-proof fuse holder adjacent to the mains inlet.
Always replace this fuse with the correct type as shown on the rear panel
legend. (N.B. A spare fuse is located in this holder.)
3. Mains Power - Connected via a standard IEC socket. A compatible power
cord is supplied with the unit.
4. External - RS232 via a 9-pin DIN DEE socket, for connection to a PC.
5. XLR Inputs and Outputs - 3 pin XLR connectors are provided for each audio
input and output. All terminations are fully balanced, pin 2 Hot, pin 3 Cold and
pin 1 Screen (shield).