Technicolor - Thomson SCENIUM DPL5000 - Manual (Page 8)

Operating Your Receiver
EN
13
Operating Your Receiver
Switching the unit on and off
• To switch on the receiver, press the ON/ECO button
on the main unit once, or the button on the
remote control.
• Standby: when the receiver is in tuner mode, press
the ON/ECO button once to enter standby
mode.
On the remote control, press the button twice
within 2 seconds if the receiver is not in Tuner source
mode to enter standby mode.
To avoid entering standby mode when powering up
the unit, do not press the
button twice within 2
seconds.
• The receiver draws a small amount of electricity when
in standby mode. Unplugging the unit from the wall
socket will stop the draw.
Selection of Audio/Video source
When one of the source buttons is pressed, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
Example 1:
If you have connected a DVD player to the DVD input
(audio & video) on the receiver, press the SOURCE
button on the main unit repeatedly until DVD is
selected or press DVD•6CH on the remote control to
receive the sounds and images transmitted by the
DVD.
Example 2:
Based on the example 1, the DVD is playing , if a VCR
is connected to the VCR input (audio & video) of the
receiver, press the SOURCE button on the main unit
repeatedly until VCR is selected or press AUX 1 (VCR)
on the remote control. The image and sound from the
VCR source will replace the DVD.
12
Display
DVD / VCR / SAT / TUNER / TAPE / CD / TV
• An arrow points to the current source mode.
• Dolby Digital audio input for signal format.
• Dolby Pro Logic II audio output format.
• DTS audio output format.
FM / AM
• Radio band indicator in Tuner mode.
ST
• Tuner stereo signal selected.
OPT 1 2
• Optical digital input selected.
COAX
• Coaxial digital input selected.
TUNED
• Tuner station detected.
• Speaker Icons.
L - Front left speaker
C - Center speaker
R - Front right speaker
LS - Left surround (rear) speaker
RS - Right surround (rear) speaker
LFE - Subwoofer speaker
SLEEP
• Unit in Sleep mode.
MEMORY
• Unit is ready to store a station in selected preset.
RDS
• Radio data system information is received.
KHz / MHz
• Tuner frequency unit.
LS RS LFE
R C L
ON/ECO
SOURCE SUBWOOFER SURROUND
SUBWOOFER SOURCE SURROUND
SUBWOOFER SOURCE SURROUND
P
S RS
R C