Toshiba SATELLITE A60 - Manual (Page 68)

68 Getting Started
Using an external keyboard
5.375 x 8.375 ver 2.3
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1 Click Start, Control Panel
2 Click Performance and Maintenance.
3 Click System.
4 The General tab view automatically appears and shows
the recognized memory.
5 If the computer does not recognize the memory
configuration, turn off the computer, turn the computer
over, remove the memory cover, and make sure the
memory module is seated properly, as described in
“Installing additional memory (optional)” on page 62 .
Using an external keyboard
If you prefer to use a full-size keyboard, you can attach one to
your computer provided that the keyboard is
USB-compatible.
To connect a keyboard, attach its cable to one of the
computer’s USB ports. You can do this after you turn on the
computer.
The Fn emulation key is not supported when using a USB
keyboard.
Connecting a mouse
You may want to use a mouse instead of the TouchPad, the
computer’s built-in pointing device.
To connect a USB mouse, plug the mouse cable into one of
the USB ports.
NOTE