Tripp Lite SR25UBSP1 - Manual (Page 2)

Unpacking Instructions
(continued)
Remove foam corner protectors. 3
Remove plastic wrap, being careful not to scratch enclosure.
Save bag with enclosure owner’s manual and other literature.
4
Remove two brackets attaching enclosure to pallet. Save brackets to
either permanently mount enclosure to fl oor in fi nal installation or for
use in repacking the enclosure.
5
Attach ramps to pallet. Insert ramp mounting tabs into mounting
grove on pallet. Position ramps so they are aligned with the
enclosure’s wheels. For added safety, Tripp Lite recommends that
you secure the ramps to the pallet with user-supplied screws.
6
DANGER!
Ensure the ramps are secured to the pallet and aligned with the enclosure wheels before rolling
the enclosure off the pallet. If ramps are not properly secured or aligned, they may collapse, causing potential
product damage and serious injury.
NOTE!
For convenience, mounting grooves are located on both the front and rear of pallet. To ease unloading,
ensure the ramps are attached to the side of the pallet where the enclosure has the least weight.
Using multiple assistants, carefully roll enclosure down ramps. 7
Repacking Instructions
Follow unpacking instructions in reverse order.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your
new Tripp Lite product. You’ll be automatically entered into a drawing for
a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specifi cations are subject to change without notice.
200704103 93-2667
1111 W. 35th Street
Chicago, IL 60609 USA
(773) 869-1234
www.tripplite.com
SIDE VIEW
X2