Taylor 3724-21 - Manual

Mechanical Kitchen Scale
Instruction Manual
3724-21
Thank you for purchasing a Taylor ® scale. Please read this instruction
manual carefully before use. Keep these instructions handy for fu-
ture reference.
GENERAL WEIGHING OPERATION
1. Place the scale base on a hard, level surface. Place the weighing
bowl so that it is stable on top of the base unit.
2. The pointer should indicate "0" before objects to be weighed are
placed on the scale. To adjust the scale to "0", rotate the scale ring,
which has the measurement increments printed on it.
3. You may also use the scale ring to tare, or offset, the weight of one
ingredient before adding another ingredient to the same bowl. For
example, if a recipe calls for 1/2 lb. rice and 1/2 lb. beans, place the
rice into the bowl, then rotate the scale ring back to "0". Add the
beans until the pointer shows 1/2. Both ingredients have been accu-
rately weighed in the same bowl.
4. Carry the scale by holding the base unit. If the scale is relocated,
readjustment to "0" may be required. To do so, repeat steps 1 and 2.