Teac USB Audio D/A Converter UD-H01 - Manual (Page 10)

10
Playing Back Music Files Stored on a Computer (1)
Installing dedicated TEAC driver software on a computer
To play back music files stored on a computer with this unit, you must download dedicated driver
software from our website and install it on the computer before making your USB connections .
<Website address for downloading the dedicated driver software>
http://www.teac.co.jp/audio/software_teac_e.html
This unit can be connected by USB and used with a computer running Windows XP, Windows
Vista, Windows 7, Mac OS X 10 .6 .4 or later . Use with a computer running a different operating
system cannot be guaranteed .
Note
Install dedicated TEAC driver software before connecting to the computer by USB.
If you connect the unit with the computer before installing the driver, it will not function
properly . Moreover, when using Windows XP, the computer could become remarkably slower
and require restarting in some cases .
< For details on how to install dedicated driver software, see our website .
< Depending on the computer’s hardware and software configuration, the unit might not function even
when used with one of the operating systems listed above .
Connect to the computer using HIGH SPEED asynchronous mode .
Sampling frequencies that can be transmitted are 32 kHz*, 44 .1 kHz, 48 kHz, 88 .2 kHz, 96 kHz,
176 .4 kHz and 192 kHz .
* If the sampling frequency of the input signal is 32 kHz, the frequency indicators do not light
up, but the input indicators do .
If the connection has been made properly, “TEAC USB HS ASYNC AUDIO” will be selectable as an
audio output destination .
< In asynchronous mode, jitter that occurs during transfer is suppressed because the clock signal of this
unit is used for playback of the audio data transmitted from the computer .