TP-Link TD-8817 - Manual (Page 9)

TD-8817 ADSL2/2+ Ethernet/USB Router User Guide
3
Chapter 2. Hardware Installation
2.1 The Front Panel
Figure 2-1
The LEDs are located on the front panel, they indicate the device’s working status. For details,
please refer to LED Explanation.
LED Explanation:
Indicator Description Status Function Details
USB USB status
On
Off
Flash
Connection to telecom network is OK
Connection on USB port is abnormal
Data is transmitting or receiving
LAN Ethernet
On
Off
Flash
Connection to telecom network is OK
Connection on LAN port abnormal
Data is transmitting or receiving
ADSL
ADSL
status
Slow flash
Quick flash
On
Self-detecting when power up
Connecting to the telecom network
Connection to telecom network is OK
Act Data
Flash
Off
There is data transmitting or receiving
on WAN port
No data transmitting or receiving on
WAN port
Power Power
On
Off
Power OK
Power fail
2.2 The Back Panel
Figure 2-2
¾ On/OFF: The switch for the power.
¾ POWER: The Power plug is where you will connect the power adapter.
¾ RESET: There are two ways to reset the Router's factory defaults.
Method one: When the device is working, please press the reset button of the Router, keep
the reset button pressed down for more than five seconds.