TDK Multilayer Chip Antennas ANT1085-4R1 - Manual (Page 3)

(3/3)
001-02 / 20080114 / e821_ant1085.fm
• All specifications are subject to change without notice.
TENSILE STRENGTH OF TERMINAL
CENTER MOUNTING
It shall be not broken after a tensile force of 1 mm is applied to the
terminal in the direction of axis for 5±1seconds.
SIDE MOUNTING
It shall be not broken after a tensile force of 2 mm is applied to the
terminal in the direction of axis for 5±1seconds.
The tested antenna is offset by 40 mm from the position where the
tensile force is applied.
20
R340
45 45
gap ±0.1 1
PCB(FR4)thickness : 0.8 mm
Dimensions in mm
20
R340
40
45 45
gap ±0.1
PCB(FR4)thickness : 0.8 mm
Dimensions in mm
2