TRENDnet TW100-BRM504 - Manual (Page 23)

Broadband ADSL Router User Guide
20
Figure 14: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the TW100-
BRM504 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TW100-BRM504.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the TW100-BRM504. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter the
TW100-BRM504's IP address, as shown in Figure 15 below.
• If necessary, use the Up button to make the TW100-BRM504 the first entry in the
Gateways list.