Telular SX5D GSM - Manual (Page 15)

CALL FUNCTIONS
Making Calls
1) Pick up the handset or press the SPEAKERPHONE key. The
SX5D is now “off-hook.”
2) Listen for dial tone.
3) Dial the phone number. The dialed number will be displayed.
The name will also be displayed if it is stored in the
phonebook.
Correct Dialing Errors
• To erase one digit, press the CLEAR key once.
• To erase all digits, press and hold down the CLEAR key until
all digits are erased.
Redial the Last Telephone Number Dialed
1) Pick up the handset. The SX5D is now “off-hook.”
2) Press the REDIAL key.
Receiving Calls
When there is an incoming call, the SX5D rings, an incoming call notification displays and blinks,
and the LED blinks.
1) Pick up the handset or press the Speakerphone key.
2) Begin talking.
NOTE: Press the REJECT key to refuse the call. The phone will stop ringing and the calling
party will be disconnected.
Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller’s number when the
SX5D rings. If the caller’s name and number are stored together
in the SX5D phonebook, the caller’s name and number will be
displayed. Contact your service provider to activate this feature.
NOTE: If there is a missed call (call is not answered), “MISSED
CALLS” will be displayed.
Ending Calls
Hang up the phone (place the handset back onto the SX5D cradle).
NOTE: If the call is ended by the other party, the SX5D will clear the
line and re-establish a dial tone. The SX5D may be used for another
call or may be hung up.
In-Call Functions
Mute a Call
1) While in a call, press the MUTE key. A notification will display
in the upper right corner of the LCD.
2) Press the MUTE button again to un-mute the microphone.
Place a Call on Hold
1) While in a call, press the MENU key.
2) Select Hold. The display will change from Active to Held.
3) To reactivate the call, press the MENU key, then select
Retrieve.
Adjust Volume
1) While in a call, press the UP/Down Volume Keys to raise or
lower the handset/speakerphone volume.
Phonecell ® SX5D GSM 15 Technical Manual
Mute a Call.
Place a Call on Hold.
Receive a Call When Caller
ID is Activated.
Adjust Volume.
Making Calls.