Teac R4-INT - Manual (Page 30)

30 30
You can set the sleep timer so that the unit turns itself off after a
specified amount of time.
Each press of the SLEEP button cycles through timer options
(from 15 up to 60 minutes). The unit will automatically stop
playback and enter Standby mode when the time elapses.
15 min.
30 min.
45 min.
60 min.
OFF
< During the sleep timer, the Sleep indicator ( ) appears on the
display.
< If you want to check the remaining time, press the SLEEP button
once. The remaining time will be displayed for 3 seconds, and
then return to the normal display.
Sleep Timer
You can set the unit to turn on at specific times. You can set two
separate timers with ALARM 1 and ALARM 2.
Setting the wake up timer
The procedures below are to set ALARM 1.
Follow similar steps to set ALARM 2.
1
Press the ALARM 1 button to enter the wake up timer
setting mode.
Alarm 1
Enable: Daily
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 12
< If the clock has not been set, clock setting display appears.
Follow the steps on page 13. (“Setting the Clock”)
2
Turn the MULTI JOG to select an item to set, and then
press the SELECT button.
< You can also use the Cursor buttons ( / ) on the remote
control unit to select an item.
3
Turn the MULTI JOG to set the value or select an item,
and then press the SELECT button.
Items of the frequency value
off Timer off
Daily Works daily
Once Works once
Weekends Works on every weekend
Weekdays Works on every weekday
< “AUX” and “Music player” cannot be selected as a mode
value.
Wake Up Timer