Tascam US-2400 - Manual (Page 2)

02/29/04 Pa
g
e
2
of
2
US-2400
Tech Note: Using the US-2400
with Pro Tools
7733 Telegraph Rd • Montebello, CA • 90640 • 323.726.0303 www.tascam.com
© 2004 TEAC Corporation Digidesign and Pro Tools are registered trademarks of Avid Technology, Inc. in the United
States and/or other countries. All other trademarks contained herein are the property of their respective owners. All
rights reserved. Design and specifi cations subject to change without notice.
Pro Tools Surround Joystick Setup
Pro Tools TDM or HD supports surround panning
controlled by a MIDI controller, but Pro Tools LE cur-
rently does not. If your system is capabile of surround
panning, and you’ve completed steps 1-5 on the previ-
ous page, here’s how you get the surround panner to
work in Pro Tools.
1. In the Peripherals dialog you set up in steps 4
and 5, set device #4 to MCS Panner.
2. Set controller #4 to receive from US2400Prt4 and
to send to US2400Prt4.