Installing the battery pack -12, Installing the battery pack – Toshiba SATELLITE PRO L300D User Manual

Page 117

Advertising
background image

User’s Manual

6-12

Power and Power-up Modes

6. Slide the battery release latch to free the battery pack for removal, then

lift up the battery pack.

Figure 6-2 Removing the battery pack

7. Pull the battery pack forward to remove it.

Installing the battery pack

To install a battery pack, follow the steps below.

1. Be sure the computer’s power is off and all cables are disconnected.

2. Insert the battery pack.

Figure 6-3 Installing the battery pack

3. Push the battery pack until it is firmly seated.

4. Slide the battery pack locking latch toward the lock position.

B

ATTERY

P

ACK

B

ATTERY

R

ELEASE

L

ATCH

For environmental reasons, do not throw away a spent battery pack.
Please return spent battery pack to your TOSHIBA dealer.

The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.

B

ATTERY

PACK

Advertising
This manual is related to the following products: