Trane GEV - Manual (Page 24)

R
Features and Benefits
ZN510 & ZN524 Controls
WSHP-PRC003-EN 24
Building Control Advantages
The Tracer ZN510/ZN524 controller has
the ability to share information with
one or several units on the same com-
munication link. This sharing of infor-
mation is made possibe via a twisted
pair of wire and a building automation
system or through Trane’s RoverTM
service tool .
An advantage of installing a
ZN510/ZN524 is its capability to work
with other LonTalk certified controllers.
This provides greater flexibility to the
building owner, as well as greater flexi-
bility in design.
Integrating the ZN510/ZN524 on water-
source equipment, and tying it to a
Tracer Summit system provides a com-
plete building management system.
Each Tracer Summit can connect to a
maximum of 120 controllers. With the
ICS system, the Tracer can initiate an
alarm on a loss of performance on
equipment malfunctions; allowing
problems to be handled in a timely
manner before compromising comfort.
This type of application would most
commonly be used for a large space(s)
that may require more than one unit. In
addition to this application design, the
Tracer ZN510/ZN524 controller provides
a way for units located within the same
space to share the same zone sensor to
prevent units from simultaneously
heating and cooling in the same
space.
See Figure 28 for Tracer
ZN510/ZN524 controller system.
Figure 28: Tracer ZN controller system installation.