Technicolor - Thomson ShowView VPH6920F - Manual (Page 30)

15
1 PROG DEBUT FIN DATE
AV - - : - - - - : - - 01.01
OPTIONS
SORTIE E
B
Programming options
During the programming procedure, you can select the OPTIONS line that offers the
following additional recording possiblities:
(1) LUN-VEN / HEBDO – to record the same programme every day between
Monday and Friday or every week at the same time.
(2) HEURE DE FIN +10 MINUTES – to add 10, 20, or 30 minutes to the stop time to allow
for programming delays and overrunning.
(3) SP/LP – LP to double the recording time available on the tape.
(4) VPS ou PDC – VPS/PDC for starting the recording the moment the
programmer starts regardless of delays, provided that
the channel broadcasts these signals (VPS or PDC on
the video recorder control screen).
R E G A R D I N G
p r o g r a m m i n g
Checking the programming
When the video recorder is on standby with symbols and on its display, press key C
on your remote control to call the checking screen up.
Erasing the programming
Switch on the video recorder and select PROGRAMMATION in the main menu (keys MENU,
1
). Seek the programming (from 1 to 8) with key 3 and erase it by pressing key 2.
Recording of a programme can be triggered by a
satellite receiver or another appliance designed for the
purpose (control voltage applied to pin 8) and
connected to socket AV1 or AV2 with a SCART cable.
This avoids having to programme both set. Programme
the connected set and in the video recorder
programming menu select AV1 or AV2 as
appropriate.
Recording programmed
on a connected set
U-T7075PSR/GB/SC-BEI/812 4/01/99 11:11 Page 15