Tascam MD-801RMKII - Manual (Page 27)

5 - Track and disc title entry
5–8
TASCAM MD-801R/P Mk II
tion will move the cursor more than one
position.
7
Continue using the DATA dial and SHUTTLE
wheel to enter characters, until the title is
complete.
8 To store the title, press the EDIT key. The title
will scroll across the display if it is too long to
fit on one line, allowing you to check it.
NOTES
If the display shows Name Full , it
means that the character limit for a title (99
characters) or for a disc (1,792 characters)
has been exceeded.
If a disc has been titled on another MD
recorder, which permits longer titles than
those permitted by the MD-801, the titles,
when edited on the MD-801, are subject to
the same limitations as those imposed on
“native” titles.
5.11.1Deleting characters
If a character is entered in error, delete it as follows:
1
Move the cursor under the character to be
deleted:
2
Press the LOC A/DEL key [24] . The character
at the cursor position will be deleted.
5.11.2Inserting characters
If you have missed out a character, insert a space for
a new character in the following way:
1
Move the cursor to the character following the
position where a character is to be inserted:
2
Press the LOC B/INS key [24] . A space will
appear into which you can enter a character:
5.11.3Changing characters
If a character has been wrongly entered, you can
change it by moving the cursor to the character, and
turning the
DATA dial.
Thus:
can be corrected by moving the cursor to the b :
and then turning the DATA dial counterclockwise:
5.11.4Editing existing titles
If a title has already been entered, for a disc or for a
track, pressing the
EDIT key and turning the DATA
dial until TITLE ? is displayed allows you to
edit it, to change characters, and insert or delete char-
acters as described above.
In stop mode, the disc title can be edited.
In play mode or play ready mode, the title of the cur-
rent track can be edited.
5.11.5Viewing titles
As explained earlier (4.2.16, "Displaying track titles
during playback"), pressing the
TITLE key during
playback will display the disc title (in stop mode) and
the current track title (in play or play ready mode).
If the title is too long to fit in the display, pressing the
TITLE key once more will scroll it across the
display.
K _
K o t o S o n a t a _
K o t o S o n a t t a
K o t o S o n a t a
K o t o S o n t a
K o t o S o n _ t a
K o t o S o n b t a
K o t o S o n b t a
K o t o S o n a t a