Topfield FREE TO AIR TF3100FEP PRO - Manual (Page 14)

INFO
GUIDE
MENU
MENU
GETTING STARTED
G
E
TTI
N
G
S
T
AR
TE
D
Press the P o w e r button to operate the STB from the STANDBY mode.
Now, the Info box will appear for a given time and disappear. Pressing the button,
the Info box will remain on the screen. The display time of the Info box is adjustable
under the I n s t a l l a t i o n Menu of the M a i n Menu.
If the current broadcast has EPG (Electronic Program Guide) with it, press the button
to see not only the current channel’s but also other channel’s EPG without any time constraints.
Also, press the button to reserve and save the current service and to watch the broadcast
automatically when it starts.
IMPORTANT: Before taking charge of your new STB, some important technical
settings are essential.
- Adjust your antenna through Dish Setting menu in installation menu.
- First, press the button on the RCU to make the M a i n Menu appear.
- Go to the L N B S e t t i n g menu under the C h a n n e l S e a r c h item of the
I n s t a l l a t i o n menu and press button.
- The Default PIN CODE is 0 0 0 0.
- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,
DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.
If the right Satellite Name and LNB Frequency were not found in the list, call the
dealer for satellite information.
- Then, press the button and go back to the C h a n n e l S e a r c h menu.
- Set the S e a r c h M o d e to the A u t o mode. (A M a n u a l or A d v a n c e d S e a r c h
can always be performed later on)
- Select the S t a r t S e a r c h . . . item and press button.
- The search procedure will take a while. Press the button when the searching
process is over (100%) to confirm and save the new channel list.
- For further information, please refer to the L N B S e t t i n g item of the MENU
OPERATIONS on this manual.