Toshiba TDP-T95 - Manual (Page 25)

49
Others
48
Specifications
■ List of general specifications
Item Specification
Consumption Power TDP-T95: 310 W
TDP-T100: 380 W
Weight TDP-T95: 2.9 kg
TDP-T100: 3.0 kg
External Dimensions
300 Ч 99 Ч 218 mm (W × H × D)
(including protruding parts)
Cabinet material
PC+ABS resin and ABS resin
Conditions for usage environment Temp: 5 °C to 35°C; relative humidity: 30% to 70%
Display pixels 1 chip DMD™
Picture elements 786,432 pixels (1024H × 768V)
Lens Zoom lens F=2.07-2.64 f=20.5-32.8 mm
Lamp TDP-T95: High-pressure mercury lamp (210 W)
TDP-T100: High-pressure mercury lamp (275 W)
Projection screen size 30-300 inches
Projection distance 1.07-11.09 m
Speaker 1W (Mono)
COMPUTER 1 Mini D sub 15 pin RGB / Y/P B /P R (dual use)
IN terminal
COMPUTER 2
Mini D sub 15 pin RGB / Y/P B /P R (dual use)
IN terminal
MONITOR terminal
Mini D sub 15 pin RGB / Y/P B /P R (dual use)
S-VIDEO terminal Mini DIN 4 pin
AUDIO (L/R) terminal RCA Pin Jack × 2, 1.5 V (rms), 22 kΩ or more
VIDEO terminal RCA Pin Jack, 1 V (p-p), 75 Ω
AUDIO (L/R) terminal RCA Pin Jack × 2, 1.5 V (rms), 22 kΩ or more
AUDIO IN terminal 3.5mm dia. stereo mini-jack, 1.5 V (rms), 22 k Ω or more
AUDIO OUT terminal 3.5mm dia. stereo mini-jack
CONTROL terminal Mini DIN 8 pin (RS-232C)
Notes
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added
in the future.
■ Separately sold product
Replacement Lamp for TDP-T95 Model TLPLW9
Replacement Lamp for TDP-T100 Model TLPLW10
Connection ter
minal
If you think something is wrong, check the followings before contacting customer service.
Please see “Trouble indications”
p.47 as well.
If This Happens Check
No power
Power goes out
during use
No picture
No audio
Picture not
displayed
correctly
Picture blurred
Part of picture
out of focus
Image is dark
Colors too light
Bad shading
Control panel
key doesn’t work
Remote control
doesn’t work
Before calling service personnel
• Is the power cord plugged in? Is it connected to the projector?
• Is the outer lamp cover attached properly?
p.44
• Is the ambient temperature high? p.47
• Is the air intake or air exhaust blocked? p.47
• Is the projector turned on? (When [Auto input search] is [Off]) p.40
• Is the mute function on? p.30
• Is the brightness setting minimized? p.35
• Are the connections set up correctly? p.22
• Are all the connected devices functioning properly?
• Is the mute function on? p.30
• Is the volume setting minimized? p.27
• Are the connections set up correctly? p.22
• Are all the connected devices functioning properly?
• Is the input signal supported by the projector? p.50 , p.51
• Is there something generating an abnormal video signal, for
instance the video tape?
• Is the lens dirty? p.46
• Is the lens focus adjusted optimally? p.27
• Is the projection distance within the projector’s supported range? p.21
• Is the projector’s screen placement angle tilted too far? p.21
• Are the sharpness or sampling phase adjustments off? p.35
• Are the brightness or contrast adjustments off? p.35
• Is the lamp nearing the end of its service life? p.42
• Are the color, tint, R-level, G-level, or B-level adjustments off? p.35
• Is the screen dirty?
• Is the blackboard mode set properly?
p.37
• Is the lamp nearing the end of its service life? p.42
• Is the key lock function on? p.41
• Is the remote control ON/OFF switch set off? p.19
• Is the remote control code identical with the projector's code? p.41
• Are the remote control’s batteries drained?
• Are the batteries inserted into the remote control correctly?
p.19
• Is the remote control being used within the effective range? p.19
• Are there any obstructions between the remote control and projector?
• Are there any fluorescent or other bright lights shining at the
projector’s infrared remote sensor?