Installing the printer - 1, 1 connecting the power cord and cables - 1, 2 holder stand installation - 1 – Toshiba TEC B-870 SERIES User Manual
Page 13: Installation procedure, 1 connecting the power cord and cables, 2 holder stand installation
Advertising
6-1
6. INSTALLATION PROCEDURE
EM1-33039E
6.1 CONNECTING THE POWER CORD AND CABLES
6.1 CONNECTING THE POWER CORD AND CABLES
Fig. 6-1
Fig. 6-2
NOTES:
1. Option B-4800-PC-QM must be installed for use of the high speed PC interface cable.
2. Different cables cannot be used at the same time.
Fit the left and right side holders into the dowels of the holder base and fasten the side holders to the
holder base with the thumbscrews.
Expansion I/O Cable
Parallel I/F Cable
(Centronics)
Serial I/F Cable (RS-232C)
Power Cord
Left Side Holder
Thumbscrew
Right Side Holder
Dowel
Holder Base
WARNING!
Turn the POWER SWITCH to OFF before connecting the power cord or cables.
Advertising
This manual is related to the following products: