Tiger TWR-180 - Manual (Page 7)

-6- June 27, 2006
Ref. Part No. Description Qty.
1 C314-155 Wing assembly, right 1
2 752-014 Hinge pin, 15" O.A. 4
3 C310-140 Hinge spacer tube, 13-7/8" O.A. 2
5 262-011 Roll Pin, 3/8 x 1-3/4 6
6 C310-141 Hinge spacer tube, 10-3/8" O.A. 1
7 262-006 Roll pin, 3/8 x 2 5
8 256-001 Flat washer, 1 6
9 C301-140 Pin, 1 x 3-13/32" O.A. 2
10 C301-114 Floating lug 2
13 330-7031 Gearbox, CCW 1
* CW Gearbox (330-7030) is required for fixed knife, material distribution, and sod kits.
See your Schulte Dealer
14
250-201 Plow bolt, ½ x 1-1/2 UNC 3
16 C310-135 Outer wing skid, standard 1
17 270-007 Lock nut, ½ UNC 10
18 256-011 Flat washer, 1/2 4
19 255-020 Lock washer, 1-1/4" 1
20 257-054 Half nut, 1-1/4" UNC 2
21 C310-145 Retainer pin, 1 x 6-15/16 U.L. 1
22 250-059 Bolt, ½ x 1-1/2 UNC 1
23 302-015 Clevis pin, 1 x 2-7/8 1
24 250-111 Bolt, 3/4 x 4 UNC 1
25 C310-124 Wheel standard suspension plate 1
26 233-050 Rubber sandwich 1
27 C310-123 Wing wheel standard assembly 1
28 270-001 Lock nut, 3/4 UNC 9
29 250-112 Bolt, 3/4 x 3 UNC 8
30 271-005 Cotter pin, 3/16 x 1-1/2 1
31 273-006 Grease nipple, self tap 1
32 C310-115 Bolt access cover plate 1
33 255-013 Lock washer, 3/8 2
34 250-018 Bolt, 3/8 x 1 UNC 2
35 C320-132 Wing adjustment assembly 1
36 250-055 Bolt, ½ x 3/4 UNF 2
37 250-061 Bolt, ½ x 1-1/4 UNC 6
38 C312-157 Adjustable side mount, right 1
WING FRAME, RIGHT