Toshiba e-studio 5520C - Manual (Page 14)

1 TROUBLESHOOTING FOR THE HARDWARE
12 Clearing a Paper Jam
The picture of the hardware device shown on the touch panel differs depending on the composition of the options
installed.
„ Clearing a paper jam
Remove the jammed paper from the bridge unit after you have cleared all the other jams. Pulling out the bridge unit
from the equipment may tear the paper left inside the equipment.
1 Clear the paper jam
Clear the paper jam following the guidance shown on the touch panel. Press or to scroll the pages.
2 After clearing the jam, close all the opened covers.
The equipment starts the warm-up. Follow the guidance on the touch panel.
‰ Tips on removing the jammed paper
Note the following points in removing the jammed paper.
Remove the jammed paper from the bridge unit after clearing all the other jams.
Remove the jammed paper from the bridge unit after you have cleared all the other jams. If you pull out the bridge unit
from the equipment with the jammed paper left, the jammed paper may be torn and left inside the equipment.
Remove the jammed paper carefully so as not to tear it.
To avoid tearing the jammed paper, remove the paper slowly with both hands. Using force may tear the paper, making it
more difficult to remove. See also that no pieces of torn paper are left inside the equipment.
When the paper jam sign remains after removing the jammed paper;
Depending on the timing of the occurrence, no jammed paper may be found where the paper jam sign indicates. If the
sign does not disappear after you have removed the jammed paper, follow the steps as instructed on the touch panel.