Taiwan Electrical & Electronic Manufacturers 190p6 User Manual
Page 39
FAQs (Frequently Asked Questions)
A:
The refresh rate is of much less relevance for LCD monitors. LCD monitors display
a stable, flicker-free image at 60Hz. There is no visible difference between 85Hz and
60Hz.
Q:
What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .
icm)?
A:
These are the driver files for your monitor. Follow the instructions in your user
manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .
icm files) or a driver disk when you first install your monitor. Follow the instructions to
insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .
icm files) will be installed automatically.
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available
resolutions. You can select the desired resolution under Windows® Control Panel
with the "Display properties"
.
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OK button, then select 'Reset' to recall all of the original factory
settings.
Q:
What is the Auto function?
A:
The AUTO adjustment key restores the optimal screen position, phase and clock
settings at the press of a single button – without the need to navigate through OSD
menus and control keys.
Note:
Auto function is available in selected models only.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the AC power cord is connected to the Monitor.
Q:
Will the LCD monitor accept an interlaced signal under PC models?
A:
No. If an Interlace signal is used, the screen displays both odd and even horizontal
file:///D|/My%20Documents/dfu/A9/english/190p6/safety/saf_faq.htm (2 of 8)2005-06-09 8:35:13 AM