Technicolor - Thomson ITC250S - Manual (Page 13)

Advanced functions
EN
13
Graphic equaliser
Select Graphic equaliser from the Sound menu and press OK to display the menu.
This menu is used to select a preset parameter and define your own settings using the
graphic equaliser. It offers the following options:
Sound preset : use the buttons to select the appropriate setting for the
programme you are watching.
The
Personal setting stores your graphic equaliser settings.
You can access the list of preset sound settings directly by pressing the red button on the
remote control, selecting the
Sound preset option and choosing one of the preset
parameters from the list.Your selection is applied to all channels and AV programmes.
Frequency range : the graphic equaliser has seven frequency bands. Select each band in
turn using the buttons and make the necessary adjustments using the buttons.
Press OK to confirm.
Note: When you are setting the graphical equaliser, Personal appears under the Sound
preset option.
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
Adjusting the picture
The menus for adjusting the picture are used to obtain the best picture setting according to
your preference, the type of programme you are watching and the ambient lighting.When
you make an adjustment only the selected option remains displayed, allowing you to see the
changes taking place on screen. The entire menu is displayed again when you select another
option or the time for making an adjustment has elapsed.
Display the OVERVIEW menu using the MENU button. Select Picture and press OK to
confirm.The Picture menu appears with the following options:
Advanced use : this option provides access to the Advanced use menu (see further
below).
Picture preset : use the buttons to select the appropriate setting for the
programme you are watching.
Personal contains the values you have defined for the settings Brightness , Colour ,
Contrast and Sharpness .
You can access the list of preset picture settings directly by pressing the red button on the
remote control, selecting the
Picture preset option and choosing one of the preset
parameters from the list.Your selection is applied to all channels.You must, however, select a
preset parameter for each AV programme.
Note: This function is not available in PIP Split screen mode.
Brightness , Colour , Contrast , Sharpness : adjust these settings as required.
Note: These settings are automatically stored under Personal under the Picture preset
option.
Contrast expand : can be used to adjust the picture according to the ambient
brightness. Select an option from the list using the buttons.
Auto noise reduction : improves the quality of the picture in the case of poor
reception. Select an option from the list using the buttons.
Note: This function is only available for certain audio-visual sources.
Lamp & Position : this option provides access to the Lamp & Position menu (see
further below).
Some menu options are not available in PIP Split screen mode (see opposite).
Press EXIT to close the menu.To return to the OVERVIEW menu, select Return and
press OK to confirm.
Return
Sound preset Film...
❿ ❿ Frequency range Treble (12 kHz)...
Equaliser
Return
Advanced use ...
Picture preset Personal...
❿ ❿ Brightness
Colour
Contrast
Contrast expand Medium...
Sharpness
Auto noise reduction Low...
Lamp & Position ...
Picture
Return
❿ ❿ Brightness
Colour
Contrast
Tone Warm...
Picture
itc250s-en 27/08/04 18:01 Page 13