TC electronic SDN BHD Nova Dynamics NDY-1 - Manual (Page 6)

6
SETUP EXAMPLE: SINGLE INPUT – DUAL OUTPUT
In this setup, the guitar signal on input A is
fed to both engines A and B. This means that
the two channels are processed 100 %
separately.
Please note that this is not a stereo setup.
• Connect your guitar to input A of the
NOVA Dynamics.
• Connect output A of the NOVA Dynamics
to the input of one amp.
• Connect output B to the input of another
amp.
You can now use the two engines like two
completely separate pedals for processing
your guitar’s sound.
Note: For best signal to noise ratio, calibrate
the pedal according to the level of the input
signal. For further information, refer to this
manual’s “Calibration” section.