Topcom Talking Pedometer 100 - Manual (Page 2)

TOPCOM Talking Pedometer 100 - User Guide V1.1
3.6 Body Weight Mode:
• Press [MODE] button 4 times. Default body weight is 60kg.
• Press [TALK] to report the current body weight.
• Press [UP] to increase or press [DOWN] to decrease the body weight
by 0.5kg (between 10 to 200kg).
• Press hold the [UP] or [DOWN] button in order to increase or
decrease the body weight rapidly.
4 Using the Talking Pedometer 100
4.1 Position the unit correctly
Clip the pedometer on your belt, slacks, or training attire. Maintain a vertical
position otherwise incorrect readings may be occurred.
On every step you take, the stepcounter will be increased by one.
4.2 Music Mode
Press [Down] to play/stop music while walking. The rhythm of the song will
play differently depends on the jogging speed. The faster the user walk, the faster
the song plays.
• Press [TALK] to report current display and the music will automatically
switch to next one.
• Press [CLEAR] to reset the count of steps, distance & burnt calories to
zero and the music will automatically switch to next one.
• Press [UP] to switch between current time, distance walked and burnt
calories and the music will automatically switch to next one.
5 Battery installation
1. Remove the screw on the right
side of the belt clip.
2. Open the door by turning counter-
clockwise.
3. Insert 1 piece CR2032.
4. Slide the rib into the slot next to
the battery
5. Close the batter door by turning
clockwise.
6. Fix the screw into position.
6 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this
product into the normal household garbage but bring the product
to a collection point for the recycling of electrical and electronic
equipments. The symbol on the product, user guide and/or box
indicate this.
Some of the product materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used products you make an
important contribution to the protection of the environment.Please contact your
local authorities in case you need more information on the collection points in
your area.
7 Specifications
Power source : DC 3V (1 x Lithium Battery CR2032)
Product size : 64 x 49 x 27 mm
Product weight : 34g
This product is in compliance with the essential requirements and other
relevant provisions of the directive 89/336/EEC.
The Declaration of conformity can be found on:
http://www.topcom.net/support/cedeclarations.php