Thule 2060 - Manual

Thule System Kit 2060
6,5 Kg
907•L5DF8
/501-2060
SATURN 4-dr, 96–
x4
29
x4
x4
03
M A X
75 Kg
LOAD
4
90
Front Rear
850 mm / 33 1 /
2
inch 860 mm / 34 inch
mm/inch
2 1
Before the load carrier can be fitted, tensioning attachments must
first be mounted. The tensioning attachments should always
be left on the vehicle.
1. Open the doors. Remove the plastic cover behind the door.
Unscrew the TORX screw (1 off) using TORX tool 15 and remove
the cover.
2. Unscrew the 6 TORX screws which keep the plastic moulding
in place. Bend the moulding out a bit as shown in the picture.
3. Press the tensioning attachment onto the moulding. The rearmost
attachment must be pressed on and then slid back to the correct
position.
4. Re-fit the moulding and the plastic cover.
Hook the brackets into place in
the tensioning attachments.
x4
305 mm
12 inch
500 mm
19 5 /
8
inch
3