Toshiba GA-1120 - Manual (Page 7)

SETUP FLO
W
5
For LPR Printing
LPR Printing is only available for Windows NT 4.0, Windows 2000, and Windows XP.
Connecting the GA-1120/GA-1130
Connect the GA-1120/GA-1130 to your network with a network cable.
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 1: Connecting to the Network
➤ Connecting network cable to the GA-1120/GA-1130
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway
Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.
REFERENCE
▼ CONFIGURATION GUIDE
▼ Chapter 4: Performing Setup from the Control Panel
▼ Network Setup options
▼ Protocol Setup options
➤ TCP/IP Setup options
Installing the Printer Driver
Install the printer driver to use SMB printing.
REFERENCE
➤ P.13 “Installing the Printer Driver for SMB Printing”
Configuring the Options
Configure the option settings on the printer driver.
REFERENCE
➤ P.47 “CONFIGURING THE OPTIONS”