TP-Link TL-WR340G - Manual (Page 65)

TL-WR340G/TL-WR340GD 54M Wireless Router User Guide
57
Figure 3-60 Reboot the router
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
¾ Change LAN IP Address. (System will reboot automatically)
¾ MAC Clone (system will reboot automatically)
¾ DHCP service function.
¾ Static address assignment of DHCP server.
¾ Web Service Port of the router.
¾ Upgrade the firmware of the router (system will reboot automatically).
¾ Restore the router's settings to factory default (system will reboot automatically).
3.12.6 Password
This page (shown in Figure 3-61) allows you to change the factory default user name and
password of the router.
Figure 3-61 Password
It is recommended strongly that you change the factory default user name and password of the
router. All users who try to access the router's Web-based utility or Quick Setup will be prompted
)
Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.