Transition Networks CSRFB10XX-100 - Manual

User’s Guide
CSRFB10xx-100
Slide-in-Module Media Converter
•
Copper to Fiber
• 10/100 Bridging (2-Port)
• 10Base-T/100Base-TX to 100Base-FX
The CSRFB10xx-100, 2-port Ethernet/Fast Ethernet
bridging media converter is designed to be installed in
a Transition Networks PointSystem™ chassis. This
converter connects 10Base-T Ethernet or 100Base-TX
Fast Ethernet twisted-pair copper network converters
to network converters on a 100Base-FX Fast Ethernet fiber network. The CSRFB
includes a status reporting feature for viewing operational parameters only from its
remotely attached CSRFB converter via the fiber connection.
Installation . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . .7
Cable Specifications . . . . . . . . . . . . .11
Technical Specifications . . . . . . . . . .12
Troubleshooting . . . . . . . . . . . . . . .13
Contact Us . . . . . . . . . . . . . . . . . . .15
Compliance Information . . . . . . . . .16
Part Number Port One - Copper
10Base-T/100Base-TX Port Two - Duplex Fiber-Optic
100Base-FX
CSRFB1011-100
RJ-45
100 m (328 ft)* ST, 1310nm multimode
2 km (1.2 miles)*
CSRFB1013-100
RJ-45
100 m (328 ft)* SC, 1310 nm multimode
2 km (1.2 miles)
CSRFB1014-100
RJ-45
100 m (328 ft)* SC, 1310 nm single mode
20 km (12.4 miles)
CSRFB1040-100
RJ-45
100 m (328 ft)*
SFP Empty Slot
CSRFB1029-100
RJ-45
100 m (328 ft)* SC, 1310nmTX/1550nmRX
20km (12.4 miles)
CSRFB1029-101
RJ-45
100 m (328 ft)* SC, 1550nmTX/1310nmRX
20km (12.4 miles)
CSRFB1029-102
RJ-45
100 m (328 ft)* SC, 1310nmTX/1550nmRX
40km (24.9 miles)
CSRFB1029-103
RJ-45
100 m (328 ft)* SC, 1550nmTX/1310nmRX
40km (24.9 miles)
Install CSRFB1029-100/101 and CSRFB1029-102/103 single-
fiber optic in the same network where one is the local (center)
converter and the other is the remote (terminal) converter.