Topfield USER GUIDE DIGITAL CABLE RECEIVER TF 100 C - Manual (Page 9)

1.2 Controlling the digital receiver 3
1.2.1 The front panel
The front panel of the digital receiver has buttons to control the
digital receiver, and specific lamps and a display to indicate its
status. The following indicates what they mean.
STANDBY
STANDBY button switches the digital receiver between
standby mode and operation mode.
lamp lights up whenever you press a button on the
remote control.
STANDBY lamp lights up while the digital receiver is in
standby mode.
CHANNEL ❝, ❛ buttons switch to previous or next service.
They are also used to navigate in menus and interactive
screens.
VOLUME ❜, ❞ buttons decrease or increase the volume.
They are also used to change values for menu options.
Front display displays the current time in standby mode,
and displays the current service in operation mode.
Pull the right edge of the front panel to open the flap. You have
to insert your subscription card into the front slot to watch pay
services.