TRENDnet TEW-P1PG - Manual (Page 10)

- 19 -
PS Wizard
PS Wizard is a convenient utility that allows you to set up the print
server’s port connection.
To launch PS Wizard:
1. Insert the Installation CD-ROM into your computer’s CD-ROM
drive, and click PS Wizard from the Auto-Run menu screen.
The welcome screen appears as below. Click Next >.
NOTE: For some specific printers, you may need to connect the
printer to the computer and install the driver. In this case, connect
it to the computer and install the driver first, and then connect it to
the print server.
- 20 -
2. In the following window, select one printer in the Printer List to
set up port connection, and then click Next >.
3. Select one printer port in the Print Server List, and click Next >.
Choose one connected
printer within the network.
Choose one connected
printer port.
Your print server name
Your printer port name